Press Release Summary: UVM Co., Ltd. is a Ukrainian manufacturer of high performance transformer oil purification systems and auxiliary equipment for maintenance of energy management. UVM offers a variety of systems designed for degasification, cleaning, drying, regeneration, purification, recycling, filtration , recovery, pumpdown, azotizing, heating, removal of water and particulate matter from transformer, turbine, cable and other oils.
Press Release Body: UVM Co., Ltd. is a Ukrainian manufacturer of high performance transformer oil purification systems and auxiliary equipment for maintenance of energy management. UVM offers a variety of systems designed for degasification, cleaning, drying, regeneration, purification, recycling, filtration , recovery, pumpdown, azotizing, heating, removal of water and particulate matter from transformer, turbine, cable and other oils.
The company employs staff of high skilled engineers and constructors whose efforts are aimed at constant developing, improving and modernizing of the production. The company responds flexibly to clients' requirements. We are able to customize equipment upon specific technical needs of our customers.
The manufactured products are divided into main categories: - deep vacuum systems - regeneration system - purification systems - adsorbent treatment systems - heating filtration systems - heating stream systems - filling-up high-voltage bushing plants - hot dry wind system - vacuum drying system
The insulation and cooling properties of the transformer are affected by the quality of the oil. Water, gases and particulates together with sludge deteriorate the oil which results in lowering of dielectric breakdown voltage. If the transformer is left untreated, it definitely brings to its failure. New oil as well requires further degasification to remove air and moisture added during transportation and handling procedures. Using of our purification systems will allow you to preserve efficiency your high-voltage equipment. Increasing require to transformer ratings provides for application of high quality and high purity transformer and insulating oils. The appropriate treatment of insulating oil will improve the properties of the whole insulating media of high-voltage equipment
The deep vacuum system category comprises UVM-6 and UVM-10M models. These systems are used for 714 48 14 fax: 380 57 714 20 37
URL: www.uvm.com.ua Skype: ukrverstmash
thermal vacuum treatment of transformer, cable, turbine and other oils by degasification, azotizing, drying and purification with aim to remove gas, water and particulate matter. The systems are used while installation, repair and operation of oil-filled high-voltage equipment up to 1150 kV (power transformers, high-voltage switches etc.) and turbines as well.
The regeneration system category comprises UVM-R-0.7 model. The system is intended for full regeneration of transformer oil with adsorbent of electrical insulating oil viscosity of which does not exceed 70 cSt at temperature 50°C. That is the system is able to restore oil to its virgin properties.
The purification system category comprises UVM-10-0.16, UVM-10-0.6, UVM-10-1.0, UVM-10-1.7, UVM-10-2.2, UVM-10-4.0, UVM-10-6.0, UVM-10-8.0 and UVM-EP-10-0.6, UVM-EP-10-4.0 models. The systems are used for removal of particulates and thermal vacuum dehydration and degasification in order to withdraw free and soluble water as well as gas out of electrical insulating and lubricating oils. UVM-EP-10-0.6 and UVM-EP-10-4.0 models enjoy explosion proof design.
The zeolite treatment system category comprises UVM-Z-4.3, UVM-Z-1.7, UVM-ZR-3.5, UVM-ZR-1.7, Zeolite Recovery Block-100, Zeolite Cartridges-260 models. UVM-ZR-1.7 and UVM-ZR-3.5 systems are intended for removal of contaminants, free and soluble water as well as for decreasing of acidity of electrical insulating and lubricating oils viscosity of which is not to exceed 70 cSt. The oils are clarified with zeolite (sorbent agent) which is restored subsequently directly in the system. UVM-Z-4.3 and UVM-Z-1.7 model enjoys the same properties as UVM-ZR-1.7 and UVM-ZR-3.5 with the exception that it is not able to recover zeolite (sorbent agent). Yet its advantage is a lower price. Zeolite Recovery Block-100 is designed for recovery of zeolite to its virgin process-dependent parameters in Zeolite Cartridges. Zeolite Cartridges-260 is used for drying of transformer oil with zeolite. Invertible design of the cartridges provides with easy loading and unloading of the zeolite.
The heating filtration system category comprises UVM-F-0.6, UVM-F-4.0, UVM-F-10-0.5 (micro). The systems are used to clarify insulating and lubricating oil from particulates as well as for thermal vacuum degasification and dehydration. The viscosity of oil does not to exceed 70 cSt at temperature +50°C. The advantages of UVM-F-10-0.5 model are that it is compact, mobile filtrating machime that can be transported with one person. For a better effect oil to be filtered must be pumped through the filter 4 or 5 times.
The heating stream system category comprises UVM-HS-70, UVM-HS-18 model. The system is used for heating transformer oil while its topping-up or changing, yet while drying of transformers. The system is suitable for heating of mineral, industrial turbine and other oils as well as for liquids that do not result in corrosion of materials the heater is made of.
The filling-up high-voltage bushing plant category comprises UVM-HVF-4 model. The system is intended for topping-up of degasified transformer oil into high-voltage oil-filled hermetic bushings while installation, repair and operation of power transformers, high-voltage switches.
2022
